Here is a list of job roles in apparel industry like Operator , Supervisor, Feeding helper, Spreader , Helper etc. and what they mean :
Continue reading “Job roles in apparel industry”Author: Varun Sanadhya
What is GIN , GRN and GDN ?
GIN , GRN and GDN are terms used quite often as warehouse terminology as a warehouse terminology mostly in ERP systems. let us understand what does these terms mean in apparel industry context.
Continue reading “What is GIN , GRN and GDN ?”What is a marker in apparel Industry?
A marker in apparel industry is an efficient arrangement of 2d pattern pieces for one or more garments in a rectangular way which is printed on paper to help in cutting of fabric by acting as a reference. The width of the marker is decided by the available fabric width.
Continue reading “What is a marker in apparel Industry?”Root cause Analysis for garment defects
Root cause analysis is a problem solving technique to identify the root cause for a defect. It is a drill down approach where a selected problem is worked through quality control tools like fishbone diagram, 5-why analysis ,4M matrix, tree diagram etc. till a final actionable root cause is found.
Continue reading “Root cause Analysis for garment defects”What are Endbits remnants in cutting of apparels ?
Leftover fabric from a roll which can’t be spread in a lay because of lay length being more than the leftover fabric is called an endbit or a remnant.
Continue reading “What are Endbits remnants in cutting of apparels ?”Recutting in apparel manufacturing
Recutting in garment industry is the process of cutting a panel again to replace a defective cut panel during the cutting process .
In most garment factories hundred percent of big cut panels are inspected for fabric and cutting defects, while smaller cut panels are not inspected. Since defectives are found after cutting the fabric, Endbits (remnants) recovered from lays or leftover fabric are used for recutting.
How fabric consumption for recutting is calculated ?
Continue reading “Recutting in apparel manufacturing”Types of garment production systems
Garment production system is defined as a structure in which machines, material handling, people and production processes are integrated to convert fabric into garments.
Types of garment production systems differ from each other by following factors:
- How many operations does one sewing operator perform?
- How many pieces flow together in the sewing line?
- How are material transferred from one workstation to other?
- How many pieces flow together in the sewing line?
- How many machines does one sewing operator operate?
Reduce Matching Time in an Assembly sewing line using workaid
I was doing my apparel internship with one of the top jacket manufacturer . There I found that lining – Body – Sleeve matching was one of major bottleneck in production. Matching operator would pick up sewn front, lining and sleeve hang them all up on an iron rod. Then she would pick up one front body piece and search for matching lining and sleeve. At one point of time there used to be atleast 50-100 lining and sleeve. So finding a particular number lining , sleeve from a stack of 50 -100 would take a lot of time . Clearly this is a highly inefficient process which affects loading in assembly line . To solve this matching /pairing problem many apparel manufacturers make use of pigeon holes.
Continue reading “Reduce Matching Time in an Assembly sewing line using workaid”Line balancing in garment industry and how it can be improved ?
line balancing in garment industry is the technique of levelling output of every operation in a garment sewing production line.
The main objectives of balancing the line is to produce the same expected output at every process of an assembly line .There should neither be accumulation of work between two process nor absence of work between the processes. It is important to maintain this balance because in an assembly line output of one process is the input for other.
If a production line is not balanced then there would be following production problems:
Continue reading “Line balancing in garment industry and how it can be improved ?”Improving line Layout in garments factory for efficiency.
Improving the line layout should be the first priority if you are trying to improve the productivity or efficiency of the factory. This is because improved line layout is the foundation over which an efficient garment factory is made. In this article we will be talking about planning and improving line layout in garments factory in such a way that the productivity and efficiency is improved. To do it is important to know what is a good line layout.
Continue reading “Improving line Layout in garments factory for efficiency.”